The Aspire Flexus replacement coils are designed to fit into the Flexus pod as part of the Aspire Flexus kit.

No matter which one you choose, either of the coils will produce an authentic MTL (Mouth To Lung) inhale with a discreet amount of vapour. However, the 0.6 Ohm coil creates a little more vapour than the 1.0 Ohm version.

Features:

MTL Vaping
Mesh Build
Multiple Resistances
Compatible With High PG E-Liquid
The mesh lattice build featured in either coil means that your e-liquid heats up faster and delivers an improved flavour. If you’re using the 0.6 Ohm coil, we’d suggest that your kit is set to around 15 – 18W. Though if you’ve chosen the 1.0 Ohm version, we’d recommend that it’s vaped at around 12 – 15W instead. To match either coil, using an e-liquid with a 50/50 or high PG concentration will deliver the best results.

Contains:

5 x Aspire Flexus Replacement Coil

Uwell Caliburn G2 Replacement Coil is designed for Uwell Caliburn G2 Pod System Kit 750mah.

Uwell Caliburn G2 cartridge adopts Pro-FOCS flavour adjusting tech to provide you with original taste and pure flavour. Caliburn G2 is compatible with 1.0 Ω coil and 0.8 Ω coil of Caliburn G.

Parameters:
Resistance: FeCrAI UN2 Meshed-H 1.2ohm(9-13W)

Features:
Pro-FOCS flavour adjusting tech
MTL & restricted DTL vaping

Horizon Sakerz Coil is a mesh coil specially made for Sakerz Tank. There are two different mesh coils that will bring you a different vaping experience.

It has two options: 0.16ohm mesh coil for 70W, 0.17ohm 2in 1 mesh coil for 70W. The unique pressure installation design is easy to use. Only 4 steps: 1. Unscrew to remove the tank base; 2. Take out the used coil with a wrench;  3. Install a new coil by pressing the coil into the chamber;  4. Make sure All o-rings are fixed;  5. Screw the tank base back onto the tank.

Compatible with HorizonTech SAKERZ Tank

The Uwell Crown 5 replacement coils have been designed for use with the Uwell Crown 5 vape tank and kits that feature it.

There are three varieties of this coil available, all of which have been designed to support sub ohm vaping and feature mesh builds to improve both flavour and vapour production. When it comes to e-liquid we recommend pairing them with a high VG e-liquid that is 70% VG or higher.

Features:

• Uwell Crown 5 Coils
• Designed For Sub Ohm Vaping
• Multiple Resistances
• Mesh Builds
• Compatible With High VG E-Liquid

The 0.2 Ohm Crown 5 coils feature the lowest resistance and rely on a triple mesh build to deliver the highest level of vapour production. Capable of being used between 65 – 70W these coils can be supported by a range of sub ohm vape devices.

The 0.3 Ohm Crown 5 coils, on the other hand, feature a dual mesh build and their slightly higher resistance are more suited to delivering a balance of flavour and vapour production. They can be used between 50 – 55W.

The 0.23 Ohm Crown 5 coils offer a mid-point between the two. They utilise a single mesh build that still delivers better flavour from e-liquids but produces slightly more vapour than the 0.2 Ohm coils. They can be used between 65 – 70W.

Important information about sub ohm vaping:

Any coil that registers below 1.0 Ohm, is known as a sub ohm coil. Recommended for advanced vapers only, they’ll require more power to use properly, which will be provided by a sub ohm vape kit.

With these coils larger amounts of vapour will be created, to support this we recommend you use e-liquids that are 60% VG or higher. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength.

Uwell Caliburn G Coil is designed specifically for use with the Uwell Caliburn G Pod Kit.

The coils are available in two types resistances. With a 0.8ohm mesh coil and a standard 1.0ohm coil to choose from. Suitable for both mouth-to-lung and direct-to-lung vaping.

Replacing the coils is simple thanks to the pod’s plug and play design. Simply slide the old coil out of the base, press-fit the new coil from the bottom of the pod to install.

It is recommended to pair using the two coils with a high PG e-liquid with a PG content greater than or equal to 50% to achieve the best performance.

Stock up on Caliburn G Coils to always ensure a tasty vaping experience at a budget-friendly cost.

The new look Uwell Caliburn G represents a welcome improvement to an already terrific pod kit, one that offers more versatility and performance without sacrificing any of the original’s simplicity or discreet style.

Unlike the closed-coil system of the original pods, the Caliburn G pods can be fitted with a 0.8ohm replaceable coil for increased vapour.

Both coils work best with high-PG, 50/50 and nicotine salts eliquids.

The SMOK RPM80 RGC Replacement Coils are designed for the new RPM 80 and RPM 80 Pro Kits.

You can choose the 0.17ohm Conical Mesh Coil or the RBA Coil. The RPM80 RGC Conical Mesh Coils powered by nexMesh technology, bring you the warm throat hit and massive cloud. The RGC RBA Coils allow you to enjoy the DIY pleasure and enjoy the purer flavor and massive vapor.

Features:
• The SMOK RPM80 RGC Replacement Coils are designed for the new RPM 80 and RPM 80 Pro Kits only.
• 0.17ohm Conical Mesh Coils deliver the fast heating rate, intense vapor production and unparalleled flavor.
• The RGC RBA Coils allows you to enjoy the DIY pleasure and enjoy the purer flavor and massive vapor.

Specifications:
RGC RBA Coil: Pre-installed 0.6ohm Clapton Coil
0.17ohm RGC Conical Mesh Coil: Recommend at 40 – 80W; with a screwdriver for convenient rebuilt.

The Aspire Cloudflask replacement coils are designed for use with the Aspire Cloudflask pod kit and replacement pods only.

These sub ohm coils feature a mesh wire construction providing a lengthy lifespan as well as enhanced flavour and cloud production.

Features:

• Sub Ohm Vape Coils
• Mesh Coil Structure
• 0.25 Ohm Resistance
• Suited To High VG E-Liquids

Providing a larger surface area to heat e-liquid, due to the mesh structured coil, clear flavour is delivered consistently. A practical push fit system makes installing the coils into the pods a simple process. With a 0.25 Ohm resistance, these coils are best suited to high VG e-liquids of 60% and above for optimum performance.

Important information about sub ohm vaping:

Any coil that registers below 1.0 Ohm, is known as a sub ohm coil. Recommended for advanced vapers only, they’ll require more power to use properly, which will be provided by an advanced vape kit.

With these coils larger amounts of vapour will be created, to support this we recommend you use e-liquids that are 60% VG or higher. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength.

The GeekVape Aegis Boost vape coils have been designed for use with the Aegis Boost pod kit or the Aegis Boost pods only.

GeekVape Aegis Boost Kit, MTL & DTL Vaping, High VG & PG Compatible.

There are two versions of this coil available, one for mouth to lung vaping and the other for direct to lung vaping.

Coil Resistance
0.4ohm, 0.6ohm
Made In
China

Features:

GeekVape replacement coils
Multiple resistances available
MTL and DTL options
Compatible with high VG and high PG e-liquid
The 0.6 Ohm Boost coils will produce a smaller amount of vapour and complement a mouth to lung vaping style. For best results, we recommend pairing them with a high PG e-liquid that is 50% PG or higher. The 0.4 Ohm boost coils produce more vapour for directly to lung vaping and work best with high VG e-liquid.

The Horizon Falcon 2 Sector Coils are the best part about the new Falcon 2 Tank.

They boast a resistance of 0.14 with a recommended wattage of 70w-75w. The design of these coils is what makes them special.

They are in a mesh and conical shape to give you a lot of extra flavor. The wick is unique too, it utilizes cotton and wood pulp to help you coils taste fresh for longer.

You’re going to love these coils.

These coils are not compatible with the original Falcon tank.

Specifications & Features

• Resistance: 0.14 Ohms
• Recommended Wattage: 70w-75W
• Conical Shape
• Mesh Wire
• Cotton & Wood Pulp Wick Blend