Kroma-Z pods come with a side-fill port, so you don’t have to remove the pod from the device when you fill it.

The pods use interchangeable 510 drip tips, so you can customise the look of your pod with the drip tip of your choice.

The device comes with replaceable coils, which means the pod lasts longer as you can change the coil when it comes to the end of its life. It also means you can change your style of vaping by choosing a different coil resistance.

COMPATIBLE COILS

Innokin Kroma-Z pods work with Innokin Z coils. Two Z coils come with the pod, including a new 0.3 Ω Z coil which is suitable for restricted Direct-Lung vaping.

COIL RATINGS

0.3 Ω Z Coil: 30 – 40 W
0.8 Ω Z Coil: 15 – 18 W

Features:

Millions of people worldwide have used and enjoyed Z-Coils

Compatible with the entire Z-Coil line

Intelligent identification of coil resistance and wattage

Wattage from 6-40 watts including the all new 0.3ohm 30-40W Z-Coil

Massive 3000mAh battery with a USB type-C cable

Sleek styling including the side firing bar with LCD screen

Adjust the airflow from a tight MTL draw to a loose RDL draw

Fill the pod with 4.5ml/2ml TPD of e-liquid without removing the pod

The Innokin Zlide Tank is an upgraded version of the Zenith MTL Tank, featuring sophisticated tweaks in design for a smoother and cleaner vape.

Upgrades include a sliding top-fill cap for easy refills with a childproof lock mechanism for safety. Alongside this, Innokin have included a removable glass tank which can be easily replaced in cracked or smashed.

The tank is compatible with the Zenith coil range as well as the latest PLEX 3D mesh coil that features extra ridges and an enlarged surface area for balanced heating and better vaporisation of e-liquid.

It’s an easy to maintain tank that can hold up to 2ml of e-liquid and now comes with customisable drip tips, with each tank coming with two designs.

The Innokin Zlide Tank is a new and improved tank with subtle designed tweaks for a better vape.

Features

Sliding Top Fill Cap

Removable Glass Tank

New PLEX 3D Mesh Coil

2ml E-liquid Capacity

Customisable Drip Tips

510 Pin

The Innokin Endura T18E Coils now come in either 1.5 ohm or 2.0 ohm BVC for the Prism T18E Tank used in the Endura T18E Vaping Kit.

The Innokin Endura T18E Coils now come in either 1.5 ohm or 2.0 ohm BVC for the Prism T18E Tank used in the Endura T18E Vaping Kit. Just like the ones that come with other Innokin Tanks, these replacement coils include Japanese organic cotton. They can be replaced in a matter of seconds and without a hassle.

NOTE – These coils ONLY fit the T18E tank and not the T18 tank

The Innokin Prism S replacement coils are designed for use with the T20S vape tank and EZ Watt Vape Kit only.

This is a versatile coil type that can be used for direct to lung or mouth to lung vaping, depending on the option chosen.

Features:

Innokin cross-compatible coils
Designed for MTL & DTL vaping
Compatible with high VG and high PG e-liquids

The Prism S 0.8 Ohm vape coils will produce larger amounts of vapour, complementing a direct to lung vaping style. For best results, we recommend pairing these Innokin coils with a high VG e-liquids, that’s 60% VG or higher.

On the other hand, the Prism S 1.5 Ohm vape coil produces a more discreet amount of vapour – for mouth to lung vaping. We recommend using these Innokin coils with a high PG e-liquid, that’s 50% PG or higher.

Designed for ease of use, these Innokin vape coils feature’no-spill coil swap’. Each coil houses a 510 connector pin; so by unscrewing the base of your tank you can pull the coil straight out and replace it, quickly and cleanly.

Please note: The Prism S Coils are not compatible with the iClear 30, iClear 30S, Endura T18 or Endura T22 tank models.

Important information about Sub Ohm Vaping:

Any coil that registers below 1.0 Ohm, is known as a sub ohm coil. Recommended for advanced vapers only, they’ll require more power to use properly, which will be provided by an advanced vape kit.

With these coils larger amounts of vapour will be created, to support this we recommend you use e-liquids that are 60% VG or higher. Due to the larger amounts of vapour that is created, we advise that you do not use an e-liquid that has higher than a 6mg nicotine strength.

Features for Innokin Prism T20-S Coils

• 1.5ohm coil for a cooler vape (recommended eliquid up to VG60%)
• 0.8ohm coil for a warmer vape
• 100% organic cotton
• Genuine Innokin T20-S replaceable coils

Compatibility for Innokin Prism T20-S Coils

• Innokin Prism T20-S Tanks only (not T20 Tanks)
• T20-S Prism Tanks part of the Innokin Endura T20-S and EZ Watt Kits (not T20 Kits)

The Innokin Adept e-cig kit has been designed to offer vapers the ultimate MTL vaping experience. Featuring a robust rubberised body which is water, dust and shock resistant, the Adept is ideal for use anywhere, including demanding environments.

The Adept has a generous built-in 3000mAh battery, which uses intelligent wattage control set between 11-17W based on which Z-Coil (Zenith) is connected. A host of protection features are present, such as overcharge, short circuit, overheat and over discharge to keep you vaping safe.

Compatible with 2A quick charge when used with a suitable wall adaptor, the Adept keeps you vaping for longer, without having to wait too long in between charges. A handy tri-colour LED clearly displays the remaining charge, and the power settings can be manually adjusted using the select button to fine tune the vape experience.

The Adept comes fitted with the Zlide tank, which has been designed in collaboration with YouTube vaping stars Phil Busardo and Dimitris Agrafiotis, and utilises the popular Zenith (Z-Coil) range. A sliding top fill system makes refills quick and simple, with the fully adjustable airflow allowing for a more customised vaping experience.

Features and Specs for Innokin Adept Mod:

Designed in Collaboration with Phil Busardo and Dimitris Agrafiotis
Shock Resistant
Water Resistant
Dust Resistant
Dimensions: 3-1/4″ x 1-9/16″ x 1-1/8″ (Without Tank)
Spring Loaded 510 Contact Pin
Built-in Battery Capacity: 3000mAh
Intelligent Auto Wattage
Higher than 1.0ohm Coil: 11 – 14W
Lower than 1.0ohm Coil: 14 – 17W
Resistance Range: 0.4 – 3.0ohm
Ergonomic Design
Durable Soft-Touch Rubberized Finish
Tri-Color LED Display Screen
Micro USB Charging Port with Silicone Seal Plug
Short Circuit Protection
Features and Specs for Innokin Zlide Tank:

Designed in Collaboration with Phil Busardo and Dimitris Agrafiotis
Dimensions: 1-15/16″ x 7/8″ (Including Drip Tip and Threads)
Diameter: 22mm
510 Threaded
E-Liquid Capacity: 2.0ml
Drip Tip Lock System
Retractable Top Fill Design
Glass Tank
Precision Four Airflow Hole Design
Bottom Adjustable Airflow Control Valve
Compatible with Innokin Zenith Atomizer Heads
Utilizes Z-PLEX3D Kanthal Mesh Coil for Flavor Boost
Includes (1) Zenith Z-PLEX3D Kanthal Mesh Coil 0.48ohm Atomizer Head (Pre-installed) (13 – 16W)
Includes (1) Zenith Kanthal Coil 1.6ohm Atomizer Head (10 – 14W)

WARNING:

Tips for new nicotine users: Sub-ohm or low resistance atomizers produce a higher throat hit than standard,high resistance atomizers. We strongly suggest 3 to 6mg eLiquid or lower with sub-ohm or low resistance atomizer heads. Preference may vary depending on the user and frequency of use.

For standard,high resistance atomizers or restrictive devices (ex. pod based,pen), we recommend 6mg or higher due to the mouth to lung (MTL) design of this atomizer,tank. Preference may vary depending on the user and frequency of use.

Warning: Sub ohm or low resistance tanks should only be used by experienced users. Extra safety precautions should be practiced when using a sub ohm tank. This tank will only work on a mechanical mod or a regulated mod capable of firing sub ohm atomizers and coils. For example, if you have a 0.2ohm coil, your mod must be able to fire atomizers of 0.2ohm or lower. You must also ensure that your batteries can handle sub ohm atomizers and coils. If you’re using a regulated mod, make sure it can handle the amps. Improper use can lead to injury or damage. For mechanical mod users, please use 20 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR AMPS, and be safe! Any questions please contact us by email.

Battery Safety Warning:

Use special caution when using Li-Ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure you have enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Do not let your batteries come into contact with metal objects such as keys, loose change or any other metal objects. Doing so will put you at risk for short circuiting your battery and explosion. Do not put loose batteries in your pocket, purse, bag or anywhere else. When the battery is not in use, you must store it in a plastic battery case to reduce the risk of a battery explosion.

Always charge in or on a fire-proof surface. Never leave charging batteries unattended.

Do not modify batteries or chargers in any shape or form.

Only use Lithium Ion rechargeable batteries in devices that have a built in protection circuit board(PCB) that detect shorts, over-discharge, over-charging etc. Use of lithium ion batteries without a PCB may increase your risk or explosion and,or fire.

Store your batteries away from the sun and heat to prevent overheating your batteries.

Please be sure to inspect your battery before use to ensure it is not damaged including tears or rips in the battery wrap. Discontinue use immediately if battery is damaged.

Do not discharge batteries below 2.5V. Do not charge the batteries over 4.2V.

myvaporstore.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.

The Innokin Prism 20S is the next generation tank and coil system. Focused on purest flavour and throat hit, this MTL (mouth to lung) tank provides an exceptional experience in how it vapourises eliquid.

The Prism T20S features a 2.0ml e-Liquid capacity with a simple top fill design with a twist off cap. The Endura Prism S coils / atomizer heads are optimized for the perfect draw and airflow while providing the ultimate flavour experience. Two different types of drip tips are available including a narrow drip tip top cap for two different types of vaping experience depending on your preference.

The coils for T20S tank can be 0.8 ohm or 1.5 ohm.

Please keep in mind that coils should be replaced every 1 to 3 weeks, ideally before the eliquid starts to change the taste or the device stops producing satisfactory vapour.

Warranty
DOA (Dead on Arrival). This is a consumable product. We want you to be happy with all our products. Should you experience any problems please get in touch.

Vape the best of both MTL & DTL with the compact Innokin EZ.WATT Vaporiser! The EZ.WATT is amazing! It’s an unbeatable kit, premium quality and beautiful! It’s Easy to operate and Great to Vape.

Do you enjoy puffing on incredible flavours with just the right amount of nicotine? Attach and vape the Endura T20S Tank with a Prism S coil for an unbeatably flavourful MTL puffing experience.
Looking for an amazing deep direct lung hit? Swap on the SlipStream tank and select 30 or 35Watts for big clouds and huge intense flavours. The bestselling Slipstream tank features full airflow control, top fill and an advanced top-down coil swap system.

It’s easy for anyone to vape great! Simply hold down the select and power button to cycle through 3 optimised wattage levels and press the Select button to choose from Low or High. The bright three colour LED clearly indicates the current wattage level (13 – 14 / 15 – 18 / 30 – 35).

Quality you can trust! The EZ.WATT has integrated safety protections and is backed by the Innokin 90 Day limited warranty.
Innokin EZ.WATT Starter Kit

Operating Wattage: 13W-35W
Battery Capacity: REAL1500mAH
Maximum Output Current：13.5A
Maximum Output Voltage: 7.5V
Clearomizer Resistance: 0.2 Ohm (min.)
Charging: Micro USB DC 5V/1A

Contents:

1x EZ.WATT Mod
1x Prism T20S Tank (0.8ohm)
1x Spare Prism S Coil (1.5 ohm)
1x Spare Drip Tip
1x Quick Start Guide
1x Micro USB Charging Cable
1x User Packet

Colours Available : Red&Black Crackle,Black,Gray,Blue,Red,Purple

You’re going to love the long lasting & beautiful colored finishes! The Endura T20-S is initially available in Standard Black and Stainless Steel finishes. In addition we have new rubberized texture in beautifully finished Red, Grey, Navy Blue and Purple.

The Endura T20-S kit comes with a 1,500mAh internal Li-Po battery. It has integrated safety protection and features ‘Vape while charging’ technology. The tri-color LED power indicator clearly shows remaining power levels and charging status. It stands 132mm tall with an optimized 18 watt output and high-quality 510 connector.

(Individual batteries are sold separately and is available in 1,500mAh & 2,000mAh)

THE PRISM T20-S TANK

The evolution of the Prism tank continues! The Prism-S is the next generation tank and coil system. Focused on pure flavor and throat hit, this MTL tank provides an exceptional experience in how it vaporizes e-liquid.

The Prism-S coil will let you taste flavors like never before! Just unscrew the cap and fill from the top. Enjoy the optimized draw for just the right amount of airflow and precision vaporization. The Ultimate Flavor Experience, available now!

Battery Capacity: REAL1500mAH/2000mAH
Maximum Output Wattage：18W
Maximum Output Current：6A
Maximum Output Voltage: 3.85V
Clearomizer Resistance: 0.6 Ohm (min.)
Charging: Micro USB DC 5V/0.5A

Contents:
1x Endura T20S
1x Prism T20S Tank (0.8ohm)
1x Spare Prism S Coil (0.8ohm)
1x Spare Drip Tip
1x Quick Start Guide
1x Micro USB Charging Cable
1x User Packet

Colors Available: Black, Stainless Steel, Blue, Red, Purple, Gray