The GeekVape Zeus Mesh Z Replacement Coils are a set of kanthal meshed heating element coil atomizers built for the new Geek Vape ZEUS Sub-Ohm Tank.

The latest variant in the tried-and-true ZEUS lineage.  Featuring a 0.4ohm and 0.2ohm option, the mesh coils are installed in a plug ‘n’ play fashion from the bottom threaded tank base. Comes in a pack of five (5).

Geek Vape ZEUS MeshZ Replacement Coils Features:

• Geek Vape ZEUS MeshZ Replacement Coil Series
• 0.4ohm Mesh Z1 Coil – rated 50-60W
• 0.2ohm Mesh Z2 Coil – rated 70-80W
• Plug ‘n’ Play Coil Installation
• Threaded Bottom Coil Base Section
• Comes in a pack of five (5).

Make sure to properly prime each coils and pods before use.

Warning: If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. Thevapeclub.ie are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

Thevapeclub.ie will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.

The SMOK RPM80 RGC Replacement Coils are designed for the new RPM 80 and RPM 80 Pro Kits.

You can choose the 0.17ohm Conical Mesh Coil or the RBA Coil. The RPM80 RGC Conical Mesh Coils powered by nexMesh technology, bring you the warm throat hit and massive cloud.

The RGC RBA Coils allow you to enjoy the DIY pleasure and enjoy the purer flavor and massive vapor.

Features:
• The SMOK RPM80 RGC Replacement Coils are designed for the new RPM 80 and RPM 80 Pro Kits only.
• 0.17ohm Conical Mesh Coils deliver the fast heating rate, intense vapor production and unparalleled flavor.
• The RGC RBA Coils allow you to enjoy the DIY pleasure and enjoy the purer flavor and massive vapor.

Specifications:
RGC RBA Coil: Pre-installed 0.6ohm Clapton Coil
0.17ohm RGC Conical Mesh Coil: Recommend at 40 – 80W; with a screwdriver for convenient rebuilt.

Voopoo PnP Replacement Coils are compatible with Voopoo Drag Baby Trio Kit.

PnP-M1 single mesh coil is for DL, reistance is 0.45ohm, and the power range is 28-35W.

Pnp-M2 sigle mesh coil is for DL, resistance is 0.6ohm, and the power range is 20-28W.

Pnp-M2 is best with nicotine content in less than 12mg.

PnP-R1 dual mesh coils is for MTL, resistance is 0.8ohm, and the power range is 12-18W.

PnP-R1 is best with nicotine content in less than 20mg.

PnP-C1 ceramic coil is for MTL, resistance is 1.2ohm, and the power range is 10-15W.

PnP-C1 is best with nicotine salt in more than 20mg.

Specifications of Voopoo PnP Replacement Coils:
PnP-M2 for Standard Version
PnP-C1 for Standard/TPD Version
PnP-R1 for TPD Version

The SMOK RPM80 RGC Replacement Coils are designed for the new RPM 80 and RPM 80 Pro Kits.

You can choose the 0.17ohm Conical Mesh Coil or the RBA Coil. The RPM80 RGC Conical Mesh Coils powered by nexMesh technology, bring you the warm throat hit and massive cloud. The RGC RBA Coils allow you to enjoy the DIY pleasure and enjoy the purer flavor and massive vapor.

Features:
• The SMOK RPM80 RGC Replacement Coils are designed for the new RPM 80 and RPM 80 Pro Kits only.
• 0.17ohm Conical Mesh Coils deliver the fast heating rate, intense vapor production and unparalleled flavor.
• The RGC RBA Coils allows you to enjoy the DIY pleasure and enjoy the purer flavor and massive vapor.

Specifications:
RGC RBA Coil: Pre-installed 0.6ohm Clapton Coil
0.17ohm RGC Conical Mesh Coil: Recommend at 40 – 80W; with a screwdriver for convenient rebuilt.

The HorizonTech Falcon Replacement Coils (M Triple Mesh, M-Dual, M1+, M2, F2, F3) delivers a truly innovative central wicking process.

Such as the utilization of natural flax fiber for flax paper and wood pulp for an astounding flavor profiles for the Falcon Resin, Artisan and King Sub-Ohm Tank.

Compatibility:
Horizon FALCON KING
Horizon Falcon RESIN Artisan Tank
Horizon Falcon RESIN
Horizon Falcon Sub-Ohm Tank

Also, the Falcon Coils are cross-compatible with the EHPro Raptor Coils.

Horizon Falcon Replacement Coil Features:

• Horizon Falcon Coil Technology
• Parallel Vertical Orientation
• 0.2ohm F1 Falcon Coil – 30% Wood Pulp & 70% Cotton – rated for 80W
• 0.2ohm F2 Falcon Coil – Natural Flax Fiber – rated for 80W
• 0.2ohm F3 Falcon Coil – Flax Fiber & Flax Paper – rated for 70W
• 0.15ohm M1 Mesh Falcon Coil – Mesh Design w/ Wood Pulp & Cotton – rated for 70W
• 0.16ohm M2 Mesh Falcon Coil – rated for 70-80W
• 0.15ohm M-Triple Mesh Falcon Coil – 30% Wood Pulp & 70% Cotton – rated for 80-85W
• 0.38ohm M-Dual Mesh Falcon Coil – Bamboo Fibers – rated for 80W
• 0.16ohm M1+ Mesh Falcon Coil – Bamboo Fibers – rated for 75W

These genuine UWELL Crown 4 Coils for the Crown 4 Tank are the finest coils available for this tank.

The Crown 4 replacement coils  feature UWELL’s patented self-cleaning technology which collects excess ejuice in a condensation chamber near the bottom of the coil and vaporizes it. This allows for less frequent cleaning of your Crown 4 Tank.

These coils also have UWELL’s patented Pro Flavor Core Optimization System (or Pro-FOCS). Pro-FOCS recycles the air through the coil two times during intake in order to saturate each puff with as much flavor as possible.

The dual helix design in these Crown 4 coils are modeled after luxury watches and made out of high quality stainless steel, providing improved taste, vapor, and coil longevity. The FeCrAl UN2 coils feature a honeycombed mesh design, enabling the coil to heat instantly and evenly.

UWELL’s wicking material is made up of 100% Organic Cotton Fiber. These attributes combined with the airflow and self-cleaning abilities of the Crown IV series of coils, affords them the ability to extend their lifespan over previous coils in the Crown family.

The Innokin Endura T18E Coils now come in either 1.5 ohm or 2.0 ohm BVC for the Prism T18E Tank used in the Endura T18E Vaping Kit.

The Innokin Endura T18E Coils now come in either 1.5 ohm or 2.0 ohm BVC for the Prism T18E Tank used in the Endura T18E Vaping Kit. Just like the ones that come with other Innokin Tanks, these replacement coils include Japanese organic cotton. They can be replaced in a matter of seconds and without a hassle.

NOTE – These coils ONLY fit the T18E tank and not the T18 tank

Genuine replacement SMOK Nord DC mouth-to-lung dual coils 0.8Ω Ohm.

Compatible with the SMOK Nord pod kit and the RPM40 pod mod. These are the newest coils in this range, see list below for reference. These coils have a tighter draw than the 0.6 Ohm Nord sub-Ohm coils (similar draw to the 1.4 Nord coils) because they’re designed for mouth-to-lung style vaping.

Coils in the SMOK Nord series:

0.6Ω Ohm – Mesh (DL direct lung sub-Ohm coil) 25W
0.6Ω Ohm – Regular DC dual coil (sub-Ohm coil) 20W
0.8Ω Ohm – DC dual coil (MTL mouth-to-lung sub-Ohm coil) 16W
0.8Ω Ohm – Mesh (MTL mouth-to-lung sub-Ohm coil) 16W
1.4Ω Ohm – Regular (MTL mouth-to-lung coil) 12W
1.4Ω Ohm – Ceramic (MTL mouth-to-lung coil)

Safety Notice

This is a dedicated coil for an all-in-one kit, but just in case there are other separate tank options in the future, or you use the coil in another tank, be aware that sub-Ohm tanks and coils must be used by experienced and knowledgeable users as additional safety precautions must be practiced when using these items. These products need to work on a mod/battery capable of firing at sub-Ohm resistances. So, for example, if you have a 0.5 Ohm coil in your tank, your mod/battery must be capable of firing at 0.5 Ohm resistance, or lower. You also need to ensure your device can cope with the amps. Improper use can lead to physical injury and damaged equipment.

These coils fit the ET-S, Nova, CE5, and K1 only! Not the Nautilus, Atlantis and other larger tanks which take a much larger coil.

Featuring dual heating coils to provide twice the vapor while also taking advantage of a bottom feed design so that the coils are always being fed just enough juice. NO exposed wicks, the liquid goes into the four holes on the side of the coil. This is the version with 4 holes, it is the new one.

The Bottom Vertical Coil (BVC) design is a major upgrade when compared to similar single coil tanks because of the uniquely designed replaceable coil and airflow system. It was designed differently to eliminate common issues such as an airy draw, gurgling, and leaking that users often experience with other clearomizers. It also works to eliminate outside influences on flavor to provide a true and pure taste

These do NOT fit the Nautilus or Nautilus Mini.

These are the NEW Organic Cotton Bottom Verticle Coils – The Aspire BVC are Bottom Vertical Single Coils while the original Aspire BDC Coils are Bottom Dual Coil.

These new Aspire Cotton coils should be allowed to “rest” after filling for a few minutes, to allow them to absorb the liquid. The cotton material should not be allowed to dry, so make sure to refill before running empty.

Aspire AVP Pro coils take pod vaping to new levels like never before. Fully compatible with the Aspire AVP Pro and its replacement pods.

Giving users the flexible choice to use a stealthy MTL style vape via the Standard 1.15ohm coil. Perfect for delivering a throat hit and good flavour levels whilst limiting the cloud production.

The Pro Mesh 0.65 coil delivers a sublime sub ohm experience. Tonnes of flavour, dense vape clouds and smooth user experience.