The Elf Bar AF5000 is perfect if you’re after a disposable that lasts longer than your typical single-use device. Providing up to 5000 puffs, this device houses an empty 2ml pod alongside a refill container that contains 10ml of 20mg nic salt e-liquid.

The 650mAh built-in battery can be recharged, and you only need to plug the container in before inhaling on the mouthpiece to get started. Outlasting up to eight disposables, this Irish-legal, 5000-puff Elf Bar requires zero maintenance.

To get set up with this disposable, just unwrap and connect the refill container before turning the device upside down to refill the built-in pod. Then, simply inhale on the mouthpiece and you’ll experience a discreet amount of vapour for an MTL (Mouth To Lung) inhale that feels just like a cigarette or disposable. You can keep topping your pod up until the refill container is empty by turning the device upside down again to let the e-liquid flow into the pod.

This device houses a pod with a built-in QUAQ mesh coil that’ll heat e-liquid quickly and evenly to improve the flavour of each puff. The vape juice that the AF5000 comes with is blended with salt nicotine, so you can expect a smooth throat hit and fast-acting craving satisfaction. Once this disposable and its e-liquid runs out, just replace it with a new one.

Contents

1 x ELFBAR AF5000 Disposable Vape Kit

Features

Rechargeable Disposable Vape
Up To 5000 Puffs
Built-In 650mAh Battery
Inhale Activated
20mg Nicotine Salt E-Liquid
2ml Pod Capacity
10ml Prefilled Refill Container
USB-C Charging

The Aspire Flexus replacement coils are designed to fit into the Flexus pod as part of the Aspire Flexus kit.

No matter which one you choose, either of the coils will produce an authentic MTL (Mouth To Lung) inhale with a discreet amount of vapour. However, the 0.6 Ohm coil creates a little more vapour than the 1.0 Ohm version.

Features:

MTL Vaping
Mesh Build
Multiple Resistances
Compatible With High PG E-Liquid
The mesh lattice build featured in either coil means that your e-liquid heats up faster and delivers an improved flavour. If you’re using the 0.6 Ohm coil, we’d suggest that your kit is set to around 15 – 18W. Though if you’ve chosen the 1.0 Ohm version, we’d recommend that it’s vaped at around 12 – 15W instead. To match either coil, using an e-liquid with a 50/50 or high PG concentration will deliver the best results.

Contains:

5 x Aspire Flexus Replacement Coil

The Aspire Flexus Blok vape kit is made for those that want a pocket-sized pod device with a long lasting battery.

With a large 1200mAh capacity, the integrated battery will last much longer than any of the previous models. It has a 12 – 18W output range, which means it’s designed for MTL (Mouth To Lung) vaping. Plus, it comes with two Aspire AF coils and a Flexus Blok pod, so you’re ready to vape.

Features:

• Beginner-Friendly Pod Kit
• 1200mAh Battery
• Single Button / Inhale Activation
• MTL Vaping
• 2ml Pods
• 3 Power Settings

You’re able to choose how your Flexus Blok operates, thanks to featuring both a fire button and inhale activation. This means you can either inhale on the mouthpiece or press the button to activate your kit. As an MTL kit, it’s built to create a discreet amount of vapour with a feel that mimics a cigarette. You’ll also find that there are 3 power settings, so you can choose your preferred level of vapour production.

To refill the 2ml Flexus Blok pod, all you need to do is slide the side to reveal the filling port – you don’t even have to remove it from the device. You’ll find that the 0.6 Ohm coil creates more vapour than the 1.0 Ohm version, but both feature a mesh design, so you experience a fuller flavour either way. No matter which coil you go with, we’d recommend a 50/50 or high PG e-liquid for best results.

Contains:

• Aspire Flexus Blok Vape Device
• Aspire Flexus Blok 2ml Pod
• 0.6 Ohm Aspire AF Mesh Coil
• 1.0 Ohm Aspire AF Mesh Coil
• USB-C Charging Cable
• User Manual

The Geekvape Wenax H1 replacement pods can hold up to 2ml of e-liquid and have been designed for use with the Geekvape Wenax H1 pod vape kit.

Thanks to their adjustable airflow, they offer a tight and smooth MTL (Mouth To Lung) inhale that closely resembles the feel of a cigarette, ideal for smokers making the switch to vaping.

Features:

• 2ml Refillable Pods
• Side-Filling
• Designed for MTL Vaping
• Adjustable Airflow

The Wenax H1 pods are refillable and feature a silicon stopper, allowing you to fill them up from the side to cut down on mess. Vapers are given a choice between a 0.7 Ohm built-in mesh coil and a 1.4 Ohm variation, however, we recommend pairing both options with 50% PG e-liquids or higher.

Contains:

• 3 x Geekvape Wenax H1 Refillable Pods

Uwell Caliburn G2 Replacement Coil is designed for Uwell Caliburn G2 Pod System Kit 750mah.

Uwell Caliburn G2 cartridge adopts Pro-FOCS flavour adjusting tech to provide you with original taste and pure flavour. Caliburn G2 is compatible with 1.0 Ω coil and 0.8 Ω coil of Caliburn G.

Parameters:
Resistance: FeCrAI UN2 Meshed-H 1.2ohm(9-13W)

Features:
Pro-FOCS flavour adjusting tech
MTL & restricted DTL vaping

The Uwell Caliburn G2 refillable pods are compatible with the Uwell Caliburn G2 pod kit.

Capable of holding up to 2ml of e-liquid, these refillable pods give you the option of pairing your kit with any flavour or nicotine strength – for a vape that suits you. Designed for MTL (Mouth To Lung) vaping, when paired with the Caliburn G coils these pods create a small amount of vapour and allow for an inhale that feels like a cigarette.

Features:

Refillable 2ml Pods
Top Filling
Adjustable Airflow
Removable Coils
MTL Vaping

Compatible With 50/50 And High PG E-Liquids
Simple to refill, the G2 pods each feature a top filling design and all you need to do to refill is remove the mouthpiece. These pods also feature an adjustable airflow wheel that makes it easy for you to swap between a tight or loose inhale. When it comes to choosing an e-liquid, you can use 50/50 and high PG e-liquids. Nic salts are a popular choice as they also create a smooth throat hit.

Lost Vape Thelema Solo 100W Mod has finally landed after some little disruption in the air. It hasn’t stopped us from getting them at an awesome price for everyone to enjoy!

Powered by either single 21700/18650 battery with max output of 100W albeit with a 21700 battery. This light weight mod features the Modern Quest 2.0 chip with multi protections and 0.96 inch TFT colour display with 6 stunning colour schemes and easy to operate. The Lost Vape Thelema Solo supports VW / Power / TC-SS994 / TC-SS316/ TC-Ni / TC-Ti / VPC / Bypass modes to meet different needs of the modern vaper. The design has taken into consideration able to hold tanks up to 28mm by a 510 thread.

Features
Quest 2.0 Chip
Wattage/Voltage/Temperature
Control/VPC/Bypass Mode
Soft/Normal/Hard Firing Mode
3 User Records
100W Max Output Power
21700/18650 battery compatible
Fashion & Removable Battery Cover Design
Type-C Fast Charging (we advise against using this for charging for warranty purposes)
C Frame Design – Compact and Comfort Grip

Parameters
Chipset: Quest 2.0
Power Range: 5-100W
Battery: 21700/18650 battery (Not included)
Battery Cover: Removable
Charge Mode: Type C
Input Current: 1A-35A
Battery Voltage: 3.0-4.2V
Input Voltage: 5V
Output Voltage: 0.7-8.0V
Temperature Range: 200F-600F (100C-315C)
Coil Material Supported: 0.1ohm-5.0ohm
Screen Pixel: 0.96 inch 80*160
Body Material: Zinc-Alloy
Coil Resistance Supported: Nickel, Titanium, SS316, SS904, Kanthal
Dimension: 104*32.6*44.2 mm

It comes with
Thelema Solo 100W Box Mod
Type-C Cable
User Manual
18650 Battery Adapter
Warranty Card

Brand
Lost Vape
Beginning their journey in 2014, Lost Vape have been astounding customers with their high-quality hardware since day one. By maintaining an adventurous spirit Lost Vape founder Frank Guo has kept it part of their mission to provide vapers with visually astounding as well as innovative vape kits. However, despite the air of professionalism that the brand offers, they have not limited themselves to producing vape kits that are only suitable for advanced vapers.

The introduction of the Ursa Quest in 2019, one of their first pod systems, proved that the company has been committed to their efforts to provide vape devices to vapers of all levels, so each Lost Vape customer never has to compromise of great, pure e-liquid flavour again. When you take into account the brand’s immaculate level of craftsmanship and engineering that they put into every pod kit, mod or coil produced by Lost Vape, it becomes all the more obvious why the brand’s popularity in the vape community has skyrocketed in recent years. Providing high quality MTL or DTL vaping no matter if you choose a pod kit or a mod kit.